EM-Tec compact and universal vise sample holders

Vise type sample holders are quick and easy to use. They hold the sample by clamping it between the moving jaws, this enables quick sample loading and reduces down time. They especially useful when similar samples or series of the same sample need to be examined. Using a vise sample holder is easier, quicker and cleaner than using conductive adhesives or glue. A vise clamps the sample and provides the rigidity needed for high resolution imaging. The compact and/or springloaded EM-Tec SEM sample holders currently available are:

  • EM-Tec V22 compact vise sample holder for sample sizes up from 0-22mm. One fixed jaw and a spindle driven moving jaw. Cost-effective compact vise which can be used in both standard SEMs and table top SEMs. Made from vacuum grade aluminium, brass spindle and stainless steel screws.
  • EM-Tec MV22 combined compact vise holder (0-22mm) plus multi pin stub holder for up to 5 standard 12.7mm pin stubs. This cost-effective multi holder has been designed for table top SEMs and SEMs with smaller specimen stages. One fixed jaw and spindle drive to move other jaw. Made from vacuum grade aluminium, brass spindle and stainless steel screws.
  • EM-Tec 3V22 triple compact vise holder includes three separately adjustable EM-Tec V22 compact vises on a single base plate. Enables holding and investigating three different samples to save on SEM venting and pumping time. Made from vacuum grade aluminium, brass spindles and stainless steel screws.
  • EM-Tec VS8 mini single action spring-loaded vise for samples with a maximum clamping size of 8mm. The vise is opened by pulling the moving vise jaw. Ideal for quickly loading thin cross-sections. The vise base dimensions are Ø25 x 12.5mm height. Made from vacuum grade aluminium with stainless steel rods and springs.
  • EM-Tec VS12 is a compact single action spring-loaded vise for samples with a maximum clamping size of 12mm. The vise is opened by pushing the moving vise jaw with a push rod. The push rod can be removed when the holder is loaded in the SEM. Dowel pins can be inserted in the fixed and moving jaws to increase the opening to a sample size up to 18mm diameter or to hold awkwardly shaped samples; 4 dowel pins are included. Made from vacuum grade aluminium with stainless steel rods and springs.
  • EM-Tec VS26 is a compact double action spring-loaded vise for samples with a maximum clamping size of 26mm. Due to the double sided spring, this vise acts as a centering vise. The vise jaws are opened by push rods which can be removed when the sample holder is loaded in the SEM. Dowel pins can be inserted in the jaws to increase the opening to a sample size up to 34mm diameter or to hold irregular shaped samples; 4 dowel pin are included. Made from vacuum grade aluminium with stainless steel rods and springs.
  • EM-Tec VS43 universal double sided spring-loaded larger vise for samples with a maximum vise opening of 42mm. Different type of jaws can be mounted on the EM-Tec universal spring-loaded vise. Opens by pulling the jaws. Dowel pin pins be inserted in the brass slider to extend the opening size and to hold awkwardly shaped samples. With the dowel pins a disc of up 50mm diameter can be held; 4 dowel pins are included. Includes triple grooved/smooth vise jaws. Additional optionally available vise jaws are:
    • vise jaw with a single 120° large groove for round samples
    • standard vise jaws with triple grooved/smooth side; vise jaws can be stacked to increase the jaw heigth from 12 to 24mm.

The EM-Tec vise sample holders are available with pin and with an M4 threaded hole. For use on JEOL SEMs, we suggest to use an EM-Tec SEM stub adapter.

#12-000321 EM-Tec VS12 compact single action spring-loaded vise holder for up to 12mm, M4

EM-Tec VS12 is a compact single action spring-loaded vise for samples with a maximum clamping size of 12mm. The vise is opened by pushing the moving vise jaw with a push rod. The push rod can be removed when the holder is loaded in the SEM. Dowel pins can be inserted in the fixed and moving jaws to increase the opening to a sample size up to 18mm diameter or to hold awkwardly shaped samples; 4 dowel pins are included. Made from vacuum grade aluminium with stainless steel rods and springs.

EM-Tec VS12 compact single action spring-loaded vise holder for up to 12mm, M4
Product # Unit
12-000321 each

# 12-000322 EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm, M4

EM-Tec VS26 is a compact double action spring-loaded vise for sample with a maximum clamping size of 26mm with M4 thread. Due to the double sided spring, this vise acts as a centering vise. The vise jaws are opened by push rods which can be remove when the sample holder is loaded in the SEM. Dowel pins can be inserted in the jaws to increase sample size up to 34mm diameter or to hold irregular shaped samples; 4 dowel pin are included. Made from vacuum grade aluminium and stainless steel rods and springs.

EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm, M4
Product # Unit
12-000322 each

# 12-000320 EM-Tec VS42 universal spring-loaded large vise holder for up to 42mm, M4

EM-Tec VS43 universal double sided spring-loaded larger vise for samples with a maximum vise opening of 42mm. Different type of jaws can be mounted on the EM-Tec universal spring-loaded vise. Opens by pulling the jaws. Dowel pin pins be inserted in the brass slider to extend the opening size and to hold awkwardly shaped samples. With the dowel pins a disc of up 50mm diameter can be held; 4 dowel pins are included. Includes triple grooved/smooth reversible vise jaws. Additional optionally available vise jaws are:
Vise jaw with a single 120° large groove for round samples Standard reversible vise jaws with triple grooved/smooth side; vise jaws can be stacked to increase the jaw heigth from 12 to 24mm. Made from vacuum grade aluminium, brass sliders and stainless steel rods and springs.

EM-Tec VS42 universal spring-loaded large vise holder for up to 42mm, M4
Product # Unit
12-000320 each

# 12-003321 EM-Tec VS12-T compact spring-loaded vise for up to 12mm with 0-90 degrees tilt, M4

EM-Tec VS12-T is a compact single action spring-loaded vise for samples up to 12mm. It is mounted on a platform which provides 0-90 degrees tilt. The vise is opened by pushing the moving vise jaw with a push rod. The push rod can be removed when the holder is loaded in the SEM. Dowel pins can be inserted in the fixed and moving jaws to increase the opening to a sample size up to 18mm diameter or to hold awkwardly shaped samples; 4 dowel pins are included. Made from vacuum grade aluminium with stainless steel rods and springs.

EM-Tec VS12-T compact spring-loaded vise for up to 12mm with 0-90 degrees tilt, M4
Product # Unit
12-003321 each
EM-Tec CVC1 standard triple grooved/smooth jaw, 12x40x6mm
Product # Unit
12-003204 each
EM-Tec CVC2 single large 120 degrees groove vise jaw, 12x40x6mm
Product # Unit
12-003205 each
EM-Tec conductive soft jaw lining kit for vise type SEM sample holders, 50x120mm sheet
Product # Unit
12-003207 each

# 12-000200 EM-Tec V22 compact vise type sample holder for up to 22mm, pin

EM-Tec V22 compact vise sample holder for sample sizes up from 0-22mm with a pin. One fixed jaw and a spindle driven moving jaw. Jaw height is 10mm, clamping width is 25mm. Cost-effective compact vise which can be used in both standard SEMs and table top SEMs. Made from vacuum grade aluminium, brass spindle and stainless steel screws.

EM-Tec V22 compact vise type sample holder for up to 22mm, pin
Product # Unit
12-000200 each

# 12-000201 EM-Tec MV22 combined compact vise (0-22mm) plus multi pin stub holder, pin

EM-Tec MV22 combined compact vise holder (0-22mm) plus multi pin stub holder for up to 5 standard 12.7mm pin stubs. This cost-effective multi holder has been designed for table top SEMs and SEMs with smaller specimen stages. One fixed jaw and spindle drive to move other jaw. Made from vacuum grade aluminium, brass spindle and stainless steel screws.

EM-Tec MV22 combined compact vise (0-22mm) plus multi pin stub holder, pin
Product # Unit
12-000201 each

# 12-002400 EM-Tec 3V22 triple compact vise sample holder for 3x up to 22mm samples, pin

EM-Tec 3V22 triple compact vise holder includes three separately adjustable EM-Tec V22 compact vises on a single base plate. Enables holding and investigating three different samples to save on SEM venting and pumping time. Made from vacuum grade aluminium, brass spindles and stainless steel screws.

EM-Tec 3V22 triple compact vise sample holder for 3x up to 22mm samples, pin
Product # Unit
12-002400 each

# 12-000221 EM-Tec VS12 compact single action spring-loaded vise holder for up to 12mm, pin

EM-Tec VS12 is a compact single action spring-loaded vise for samples with a maximum clamping size of 12mm. The vise is opened by pushing the moving vise jaw with a push rod. The push rod can be removed when the holder is loaded in the SEM. Dowel pins can be inserted in the fixed and moving jaws to increase the opening to a sample size up to 18mm diameter or to hold awkwardly shaped samples; 4 dowel pins are included. Made from vacuum grade aluminium with stainless steel rods and springs.

EM-Tec VS12 compact single action spring-loaded vise holder for up to 12mm, pin
Product # Unit
12-000221 each

# 12-000222 EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm, pin

EM-Tec VS26 is a compact double action spring-loaded vise for sample with a maximum clamping size of 26mm with pin. Due to the double sided spring, this vise acts as a centering vise. The vise jaws are opened by push rods which can be remove when the sample holder is loaded in the SEM. Dowel pins can be inserted in the jaws to increase sample size up to 34mm diameter or to hold irregular shaped samples; 4 dowel pin are included. Made from vacuum grade aluminium and stainless steel rods and springs.

EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm, pin
Product # Unit
12-000222 each

# 12-000220 EM-Tec VS42 universal spring-loaded large vise holder for up to 42mm, pin

EM-Tec VS42 universal double sided spring-loaded larger vise for samples with a maximum vise opening of 42mm. Different type of jaws can be mounted on the EM-Tec universal spring-loaded vise. Opens by pulling the jaws. Dowel pin pins be inserted in the brass slider to extend the opening size and to hold awkwardly shaped samples. With the dowel pins a disc of up 50mm diameter can be held; 4 dowel pins are included. Includes triple grooved/smooth reversible vise jaws. Additional optionally available vise jaws are:
Vise jaw with a single 120° large groove for round samples Standard reversible vise jaws with triple grooved/smooth side; vise jaws can be stacked to increase the jaw height from 12 to 24mm. Made from vacuum grade aluminium, brass sliders and stainless steel rods and springs.

EM-Tec VS42 universal spring-loaded large vise holder for up to 42mm, pin
Product # Unit
12-000220 each

# 12-003228 EM-Tec VS8 mini spring-loaded vise holder for up to 8mm, M4

EM-Tec VS8 is a mini single action spring-loaded vise for samples with a maximum clamping size of 8mm. The vise is opened by pulling the moving vise jaw. Ideal for quickly loading thin cross-sections. The vase base dimensions are Ø25 x 12.5mm height. Made from vacuum grade aluminium with stainless steel rods and springs.

EM-Tec VS8 mini spring-loaded vise holder for up to 8mm, M4
Product # Unit
12-003228 each

# 12-000300 EM-Tec V22 compact vise type sample holder for up to 22mm, M4

EM-Tec V22 compact vise sample holder for sample sizes up from 0-22mm with M4 thread. One fixed jaw and a spindle driven moving jaw. Jaw height is 10mm, clamping width is 25mm. Cost-effective compact vise which can be used in both standard SEMs and table top SEMs. Made from vacuum grade aluminium, brass spindle and stainless steel screws.

EM-Tec V22 compact vise type sample holder for up to 22mm, M4
Product # Unit
12-000300 each

# 12-000301 EM-Tec MV22 combined compact vise (0-22mm) plus multi pin stub holder, M4

EM-Tec MV22 combined compact vise holder (0-22mm) plus multi pin stub holder for up to 5 standard 12.7mm pin stubs. This cost-effective multi holder has been designed for table top SEMs and SEMs with smaller specimen stages. One fixed jaw and spindle drive to move other jaw. Made from vacuum grade aluminium, brass spindle and stainless steel screws.

EM-Tec MV22 combined compact vise (0-22mm) plus multi pin stub holder, M4
Product # Unit
12-000301 each

# 12-003400 EM-Tec 3V22 triple compact vise sample holder for 3x up to 22mm samples, M4

EM-Tec 3V22 triple compact vise holder includes three separately adjustable EM-Tec V22 compact vises on a single base plate. Enables holding and investigating three different samples to save on SEM venting and pumping time. Made from vacuum grade aluminium, brass spindles and stainless steel screws.

EM-Tec 3V22 triple compact vise sample holder for 3x up to 22mm samples, M4
Product # Unit
12-003400 each

# 12-000321 EM-Tec VS12 compact single action spring-loaded vise holder for up to 12mm, M4

EM-Tec VS12 is a compact single action spring-loaded vise for samples with a maximum clamping size of 12mm. The vise is opened by pushing the moving vise jaw with a push rod. The push rod can be removed when the holder is loaded in the SEM. Dowel pins can be inserted in the fixed and moving jaws to increase the opening to a sample size up to 18mm diameter or to hold awkwardly shaped samples; 4 dowel pins are included. Made from vacuum grade aluminium with stainless steel rods and springs.

EM-Tec VS12 compact single action spring-loaded vise holder for up to 12mm, M4
Product # Unit
12-000321 each

# 12-000322 EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm, M4

EM-Tec VS26 is a compact double action spring-loaded vise for sample with a maximum clamping size of 26mm with M4 thread. Due to the double sided spring, this vise acts as a centering vise. The vise jaws are opened by push rods which can be remove when the sample holder is loaded in the SEM. Dowel pins can be inserted in the jaws to increase sample size up to 34mm diameter or to hold irregular shaped samples; 4 dowel pin are included. Made from vacuum grade aluminium and stainless steel rods and springs.

EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm, M4
Product # Unit
12-000322 each

# 12-000320 EM-Tec VS42 universal spring-loaded large vise holder for up to 42mm, M4

EM-Tec VS43 universal double sided spring-loaded larger vise for samples with a maximum vise opening of 42mm. Different type of jaws can be mounted on the EM-Tec universal spring-loaded vise. Opens by pulling the jaws. Dowel pin pins be inserted in the brass slider to extend the opening size and to hold awkwardly shaped samples. With the dowel pins a disc of up 50mm diameter can be held; 4 dowel pins are included. Includes triple grooved/smooth reversible vise jaws. Additional optionally available vise jaws are:
Vise jaw with a single 120° large groove for round samples Standard reversible vise jaws with triple grooved/smooth side; vise jaws can be stacked to increase the jaw heigth from 12 to 24mm. Made from vacuum grade aluminium, brass sliders and stainless steel rods and springs.

EM-Tec VS42 universal spring-loaded large vise holder for up to 42mm, M4
Product # Unit
12-000320 each
EM-Tec CVC1 standard triple grooved/smooth jaw, 12x40x6mm
Product # Unit
12-003204 each
EM-Tec CVC2 single large 120 degrees groove vise jaw, 12x40x6mm
Product # Unit
12-003205 each
EM-Tec conductive soft jaw lining kit for vise type SEM sample holders, 50x120mm sheet
Product # Unit
12-003207 each

Contact us form more informations about this Product

Per preventivi e richieste commerciali in merito a questo prodotto compila il form sottostante:

RIMANI AGGIORNATO

Iscriviti alla nostra newsletter 

Richiedi informazioni

Contattaci per richiedere informazioni riguardo i nostri prodotti e servizi, entra in contatto con in nostri esperti.