The EM-Tec gripping stub and stub based vise holders are useful to grip and hold SEM samples without much need for sample preparation. Ideal for cross-section and edge-on imaging. The comprehensive selection of this type of cost-effective gripping and vise type holders is compatible with SEMs using pin stubs (FEI, Zeiss, Tescan, Phenom, Aspex), SEMs using M4 thread (Hitachi and EM-Tec SEM stage adapters) and JEOL SEMs.
EM-Tec GS24 gripping stub holder with clamping plate, 0-4mm, aluminium, pin
EM-Tec GS24 gripping stub with clamping plate to hold cross section samples or tissue up to 4mm thickness. Sample is held by the clamping plate which is pushed with set screws. Also useful for holding tissue for dehydration and CPD processing. Holder dimensions are 24x12x12mm, standard Ø3.2mm pin.
 | EM-Tec GS24 gripping stub holder with clamping plate, 0-4mm, aluminium, pin |
|---|---|
| Product # | Unit |
| 12-000234 | each |
EM-Tec PS4 mini pin stub vise clamp 0-4mm, Ø12.7×7.2mm, pin
EM-Tec PS4 mini pin stub vise clamp for sample thickness from 0-4mm. The sample is held vertically with a small set screw. Most effective way to study cross sections of thin samples. Holder size w/o pin is Ø12.7×7.2mm.
 | EM-Tec PS4 mini pin stub vise clamp 0-4mm, Ø12.7×7.2mm, pin |
|---|---|
| Product # | Unit |
| 10-002240 | each |
EM-Tec PV5 mini vise sample clamp, pin
EM-Tec PV5 mini sample vise clamp for sample thickness from 0-5mm. The sample is held vertically between the vise jaws. The vise jaws are tightened by a brass thumb screw. Holder size w/o pin is Ø12.2x17mm.
 | EM-Tec PV5 mini vise sample clamp, pin |
|---|---|
| Product # | Unit |
| 12-002209 | each |
EM-Tec PS44 quad vise stub holder for 4 samples from 0-4mm, pin
The samples are held vertically with 4 small set screws. Most effective way to study cross sections or thin samples. Holder size w/o pin is Ø25.4 x 7.2mm. Standard pin.
 | EM-Tec PS44 quad vise stub holder for 4 samples from 0-4mm, pin |
|---|---|
| Product # | Unit |
| 10-002244 | each |
EM-Tec PS6 mini split pin stub vise clamp 0-6mm, Ø12.7×7.2mm, pin
EM-Tec PS6 mini pin stub split vise clamp for sample thickness from 0-6mm. The sample is clamped between the two min vise clamps. The split vise jaws are closed by an allen screw. Closed split vise diameter is 12.7mm; when opened it is 19×12.7mm.
 | EM-Tec PS6 mini split pin stub vise clamp 0-6mm, Ø12.7×7.2mm, pin |
|---|---|
| Product # | Unit |
| 10-002218 | each |
EM-Tec PS7 mini pin stub dual slot vise clamp, 2x1mm, Ø15x6mm, pin
EM-Tec PS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer pieces samples for cross section imaging. Samples are clamped by set screws. Holder size w/o pin is Ø15x6mm.
 | EM-Tec PS7 mini pin stub dual slot vise clamp, 2x1mm, Ø15x6mm, pin |
|---|---|
| Product # | Unit |
| 10-002242 | each |
EM-Tec PS12 pin stub vise clamp 0-12mm, Ø25×7.2mm, pin
EM-Tec PS12 pin stub vise clamp for sample thickness from 0-12mm. The sample is held vertically with a set screw. Most effective way to study cross section of thin samples. Holder size w/o pin is Ø25x6mm.
 | EM-Tec PS12 pin stub vise clamp 0-12mm, Ø25×7.2mm, pin |
|---|---|
| Product # | Unit |
| 12-000112 | each |
EM-Tec PS9 mini split mount vise 0 – 8mm, pin
EM-Tec PS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two jaws of the split mount. The split mount vise jaws are closed by two allen screws. Closed mini split mount vise dimensions without pin are Ø15x10mm; when opened 23x15x10mm.
 | EM-Tec PS9 mini split mount vise 0 – 8mm, pin |
|---|---|
| Product # | Unit |
| 12-000230 | each |
EM-Tec GS24 gripping stub holder with clamping plate, 0-4mm, aluminium, M4
EM-Tec GS24 gripping stub with clamping plate to hold cross section samples or tissue up to 4mm thickness. Sample is held by the clamping plate which is pushed with set screws. Also useful for holding tissue for dehydration and CPD processing. Holder dimensions are 24x12x12mm x M4.
 | EM-Tec GS24 gripping stub holder with clamping plate, 0-4mm, aluminium, M4 |
|---|---|
| Product # | Unit |
| 12-000334 | each |
EM-Tec HS6 mini M4 cylinder stub vise clamp 0-6mm, Ø15x10mm, M4
EM-Tec HS6 mini M4 cylinder stub vise clamp for sample thickness from 0-6mm. The sample is held vertically with a small set screw. Simple and cost-effective way to clamp cross sections of thin samples. Holder stub size is Ø15x10mmxM4.
 | EM-Tec HS6 mini M4 cylinder stub vise clamp 0-6mm, Ø15x10mm, M4 |
|---|---|
| Product # | Unit |
| 12-000306 | each |
EM-Tec HV5 mini vise sample clamp, M4
EM-Tec HV5 mini sample vise clamp for sample thickness from 0-5mm. The sample is held vertically between the vise jaws. The vise jaws are tightened by a brass thumb screw. Holder size is Ø12.2x17mmxM4.
 | EM-Tec HV5 mini vise sample clamp, M4 |
|---|---|
| Product # | Unit |
| 12-003209 | each |
EM-Tec HS15 M4 cylinder stub vise clamp 0-16mm, Ø25x10mm, M4
EM-Tec HS15 M4 cylinder stub vise clamp for sample thickness from 0-16mm. The sample is held vertically with a set screw (multiple lengths are supplied). Cost effective and practical small vise clamp base on the stub size of Ø25x10mmxM4.
 | EM-Tec HS15 M4 cylinder stub vise clamp 0-16mm, Ø25x10mm, M4 |
|---|---|
| Product # | Unit |
| 12-000315 | each |
EM-Tec HS7 mini M4 cylinder stub dual slot vise clamp, 2x1mm, Ø15x6mm, M4
EM-Tec HS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer like samples for cross section imaging. Sample are clamped by set screws. Holder size is Ø15x6mm, M4 threaded hole.
 | EM-Tec HS7 mini M4 cylinder stub dual slot vise clamp, 2x1mm, Ø15x6mm, M4 |
|---|---|
| Product # | Unit |
| 12-000328 | each |
EM-Tec HS9 mini split mount vise 0 – 8mm, M4
EM-Tec HS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two jaws of the split mount. The split mount vise jaws are closed by two Allen screws. Closed mini split mount vise dimensions are Ø15x10mm; when opened 24x15x10mm. M4 threaded hole in the base.
 | EM-Tec HS9 mini split mount vise 0 – 8mm, M4 |
|---|---|
| Product # | Unit |
| 12-000330 | each |
EM-Tec JS4 mini cylinder stub vise clamp 0-4mm, JEOL Ø12.2x10mm
EM-Tec JS4 mini cylinder stub vise clamp for sample thickness from 0-4mm. The sample is held vertically with a small set screw. Most effective way to study cross section of thin samples. Holder stub size is Ø12.2x10mm.
 | EM-Tec JS4 mini cylinder stub vise clamp 0-4mm, JEOL Ø12.2x10mm |
|---|---|
| Product # | Unit |
| 12-000504 | each |
EM-Tec JV5 mini vise sample clamp, JEOL Ø12.2mm stub base
EM-Tec JV5 mini sample vise clamp for sample thickness from 0-5mm. The sample is held vertically between the vise jaws. The vise jaws are tightened by a brass thumb screw. Compatible with holders for the Ø12.2x10mm JEOL stub with a height of 17mm above the stub.
 | EM-Tec JV5 mini vise sample clamp, JEOL Ø12.2mm stub base |
|---|---|
| Product # | Unit |
| 12-000509 | each |
EM-Tec JS12 cylinder stub vise clamp 0-12mm, JEOL Ø25x10mm
EM-Tec JS12 cylinder stub vise clamp for sample thickness from 0-12mm. The sample is held vertically with a set screw (multiple lengths are supplied). Cost effective and practical small vise clamp based on the stub size of Ø25x10mm.
 | EM-Tec JS12 cylinder stub vise clamp 0-12mm, JEOL Ø25x10mm |
|---|---|
| Product # | Unit |
| 12-000512 | each |
