EM-Tec transmission-EBSD sample holders for TEM and FIB grids

EBSD  analysis is a powerful microstructural crystallographic characterisation technique for crystalline or polycrystalline materials. Standard EBSD analysis on bulk samples and surfaces is performed on high-tilt samples (typically 70° from horzontal). The EBSD pattern reveals the crystal orientation and in polycrystalline materials the variation of orientation amongst the crystals. For optimum EBSD results, deformation free, polished surfaces are needed.

Transmission EBSD analysis is only possible on (very) thin TEM samplessuspended on a TEM grid or on a TEM lamella attached to an FIB grid. EBSD analysis on thin samples can be performed in backscatter mode at 70° tilt (from horizontal) or transmision mode at 20° (from horizontal). For transmission EBSD or t-EBSD is is imperative that transmitted electrons can reach the EBSD detector without any obstruction.

The EM-Tec  t-EBSD holders are specifically designed to generate transmission Kikuchi patterns. The transmission EBSD holders include an opening of Ø2mm in the base. The top is formed by a fork-shaped phosphor bronze clip which clamps the TEM or FIB grid.  Transmission EBSD imaging and analysis is possible over the Ø2mm  area.
The  EM-Tec t-EBSD holders are available  with 1 of 3 TEM grid capacity. The choice of configuations include:

  • EM-Tec T1 t-EBSD sample holder for a single TEM or FIB grid, standard Ø3.2mm (1/8”) pin to be mounted on existing pre-tilt holders
  • EM-Tec T3 t-EBSD sample holder for three TEM or FIB grids, standard Ø3.2mm (1/8”) pin to be mounted on existing pre-tilt holders
  • EM-Tec TE1 t-EBSD sample holder kit for a single TEM or FIB grid with 70° and 20° pre-tilt, pin / M4
  • EM-Tec TE3 t-EBSD sample holder kit for three TEM or FIB grid with 70° and 20° pre-tilt, pin / M4
EM-Tec TE1 t-EBSD holder for a single TEM / FIB Lift-out grid, pin
Product # Unit
12-002371 each
EM-Tec TE3 t-EBSD holder for three TEM / FIB Lift-out grids, pin
Product # Unit
12-002373 each
3x EM-Tec replacement TEM grid clip for EM-Tec t-EBSD holders plus 3 x M2x3mm brass screw
Product # Unit
12-002270 pkg/3
3x EM-Tec special Molybdenum TEM grid clip for EM-Tec t-EBSD holders plus 3 x M2x3mm stainless steel screw
Product # Unit
12-002275 each
EM-Tec TE3 t-EBSD holder kit 20° / 70° for three TEM / FIB Lift-out grid, pin
Product # Unit
12-002273 each
EM-Tec TE1 t-EBSD holder kit 20° / 70° for single TEM / FIB Lift-out grid, pin
Product # Unit
12-002271 each
EM-Tec TE3 t-EBSD holder kit 20° / 70° for three TEM / FIB Lift-out grids, M4
Product # Unit
12-003273 each
EM-Tec TE1 t-EBSD holder kit 20° / 70° for single TEM / FIB Lift-out grid, M4
Product # Unit
12-003271 each

Contact us form more informations about this Product

Per preventivi e richieste commerciali in merito a questo prodotto compila il form sottostante:

RIMANI AGGIORNATO

Iscriviti alla nostra newsletter 

Richiedi informazioni

Contattaci per richiedere informazioni riguardo i nostri prodotti e servizi, entra in contatto con in nostri esperti.