EM-Tec versatile vise clamp sample holders

The EM-Tec S-Clip sample holders all comprise one or more springloaded sample clips (S-Clips) either on an SEM sample stub or a SEM sample holder. The springloaded S-clips are specifically designed to hold thin specimens up to 2mm on a holder. Optional stand-off pillars are available to accomodate thicker samples. Small washers can also be used to increase the clamping height. The S-clip are mounted with a small M2 screw which allows the S-clip to rotate. The S-Clips are made from conductive spring grade copper alloy; samples are clamped securely without the need for conductive adhesives or conductive pastes. Sample changing is quick, easy and clean; contamination issues due to adhesives or glues are eliminated. They are ideal to hold Si chips and other thin samples.

The EM-Tec versatile vise clamp holders are large vise clamp sample holders with positionable vise clamp plates. These sample holders can accommodate large and heavy samples or even multiple samples. They are designed for SEMs with large sample stages which can cope with larger and or heavier samples.

The EM-Tec versatile vise clamp holders consist of a vise plate with two parallel rows of holes to position the vise clamp plates.  The positionable vise clamp plates can be mounted on the baseplate in 10mm intervals for optimum sample size compatibility. Made from vacuum grade aluminium with brass mounting screws and steel clamping screws. The sample can be adequately held using the clamping screws; two sets of 3 with 10mm and 16mm length are provided with each vise clamp plate. 
The EM-Tec versatile vise clamp holders are designed as a freely configurable holders. There are two models to fit various sample sizes:

  • EM-Tec V80 versatile vise clamp holder – for samples up to 80mm
  • EM-Tec V120 versatile vise clamp holder – for samples up to 120mm.

Additional vise clamp plates can be added to mount multiple samples in the same vise clamp holder. Currently , there are three types of vise clamps available:

  • standard vise clamp plates with 12mm height and 2 sets of 3 clamping screws
  • optional grooved vise clamp plates with 16mm height and 2 sets of 3 clamping screws
  • height extension vise clamp plates with 12mm height and 2 sets of 3 set clamping screws. Mount one or two extension vise clamp plates on the standard vise clamp plates to increase the clamp height to 24mm or even 36mm.

The standard and height extension vise clamp plates can be mounted either way to optimize the height of the set screws. With the additional vise clamp plates, you can freely configure the EM-Tec versatile vise clamp holders and you should be able mount virtually any sample up 80 mm or 120mm respectively.

EM-Tec V80 versatile vise clamp sample holder for up to 80mm, pin
Product # Unit
12-000203 each
EM-Tec V120 versatile vise clamp sample holder for up to 120mm, pin
Product # Unit
12-000205 each
EM-Tec V80 versatile vise clamp sample holder for up to 80mm, M4
Product # Unit
12-000303 each
EM-Tec V120 versatile vise clamp sample holder for up to 120mm, M4
Product # Unit
12-000305 each
EM-Tec V80 versatile vise clamp sample holder for up to 80mm, Ø14mm JEOL stub
Product # Unit
12-000603 each
EM-Tec V120 versatile vise clamp sample holder for up to 120mm, Ø14mm JEOL stub
Product # Unit
12-000605 each
EM-Tec VC12 standard vise clamp plate 12x44x5mm incl. set screws
Product # Unit
12-000204 each
EM-Tec VC16 grooved vise clamp plate 16x44x5mm incl. set screws
Product # Unit
12-000206 each
EM-Tec VH12 height extension vise clamp plate for VC12 with mounting screws, incl. set screws
Product # Unit
12-000207 each

Contact us form more informations about this Product

Per preventivi e richieste commerciali in merito a questo prodotto compila il form sottostante:

RIMANI AGGIORNATO

Iscriviti alla nostra newsletter 

Richiedi informazioni

Contattaci per richiedere informazioni riguardo i nostri prodotti e servizi, entra in contatto con in nostri esperti.